Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Door Panel on a Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Door trim panel

See other generations:
Video tutorial

Want to remove the door panel of the Toyota Yaris? Let's look at the disassembly of the parts. Remove the cover of the internal handle on the panel and also take out the window switch panel.

Unscrew the securing screws found above the cover panel (also on its side). Detach the securing clips.

Finally, pull the panel away with your hands and disconnect it from the door (disconnect the power wiring and the opening cable). Carry out the desired maintenance inside the door.

Refit the cover panel and its covering pieces once maintenance is complete.


Updated on 2 May 2026 by ScegliAuto


Related tutorials

Removing the Door Panel on a Toyota Yaris
Removing the Door Panel on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Is the door panel on your Toyota Yaris in need of replacement? Here’s how to remove it. Disconnect the battery terminals located in the engine bay (i…
How to Remove the Left Door Panel on a Toyota Yaris
How to Remove the Left Door Panel on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Is the left door panel on your Toyota Yaris in need of replacement? Learn how to proceed. Disconnect the battery terminals in the engine compartment …
How to Remove the Inner Door Panel on a Yaris
How to Remove the Inner Door Panel on a Yaris
Toyota Yaris (2005-2011 / Xp90) How do you remove the cover panel of the Yaris? Let's see how to take off the panel from above the door. Remove the plastic covering inside the door …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos