Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Fuel Pump on Toyota Yaris 1.0 VTi

Model: Toyota Yaris Xp10 - Years 1999-2005
Part: Fuel pump

In today's tutorial video, learn how to remove and replace the fuel pump on a first-generation Toyota Yaris by following these simple steps. First, open the boot and fold down the rear seats; then, remove the covering underneath to access the pump cover. At this point, pry up the sides to remove it and disconnect the electrical connector and the fuel hose. Now, unscrew the side fixing screws of the pump to lift and remove it, as illustrated in the video. Finally, replace it with the new one!

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Fuel Pump with Float from Toyota Yaris
Removing Fuel Pump with Float from Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) In this tutorial video, you will learn how to remove the fuel pump with float from a Toyota Yaris. The float is located under the rear seats of the c…
Replacing the Fuel Float on a Toyota Yaris
Replacing the Fuel Float on a Toyota Yaris
Toyota Yaris (2020-2026 / MK 4) Access the area beneath the rear seat, lift the adhesive tape securing the cables, and use a screwdriver to pry up the cover plate of the fuel pump c…
Removing the Fuel Pump Float on a Toyota Yaris
Removing the Fuel Pump Float on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Let’s look at removing the fuel pump float inside the tank of the Yaris. Disconnect the battery cables before removing any electrical components, the…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2005-2011 - Where is the fuel pump located on Toyota Yaris? Read answer
    • Yaris 2005-2011 - Where is the fuel pump relay located in the Toyota Yaris? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos