Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Toyota Yaris

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Service warning light

To permanently remove the maintenance light from the dashboard display of your Toyota Yaris, a manual reset is required. If you have never performed this operation before, do not worry; just follow the instructions below. Insert the key and turn on the ignition. Press the Menu button several times until you see the "Trip" option in the menu. At this point, turn off the ignition and press and hold the button used earlier for several seconds. At the same time, turn the ignition back on and release the button after about five seconds. Finally, turn off the ignition, and you're done.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Trip Meter on a Toyota Yaris
Resetting the Trip Meter on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In today's video, we will see how to reset the trip meter on a Toyota Yaris in simple steps. First, get into the cabin and turn on the instrument pan…
How to Fold Down the Rear Seats of a Toyota Yaris
How to Fold Down the Rear Seats of a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Before starting, open the rear doors of your Toyota Yaris. Begin by pulling up the two hooks located at the upper corners of the rear seats, thus rel…
How to Remove the Front Bumper of a Toyota Yaris
How to Remove the Front Bumper of a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Start by opening the bonnet of your Toyota Yaris by pulling the designated release handle located at the bottom left of the steering column. Next, un…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2005-2011 - What does the oil warning light on the Toyota Yaris indicate? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos