Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Rav 4
  6. : Toyota RAV 4 door lock replacement

Toyota Rav 4 - Video tutorial

Model: Toyota Rav 4 Xa30, MK 3 - Years 2006-2013
Part: Lock
Operation: Toyota RAV 4 door lock replacement

In this video tutorial we will see how to remove and replace, in simple and quick steps, the lock cylinder of the Toyota Rav 4. First we open the front door and start by removing the plastic cap that we find on the side, using something thin as a lever. ; then we go to unscrew the screw that we find inside the hole (using a T30 torx screwdriver), so that we can release and remove our lock cylinder later, as shown in the video. Now remove the cylinder and replace it with the new one, reassembling everything!


Posted on 14 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Rav 4 2013-2018 - What to do if the Toyota Rav4 tailgate won't open? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos