Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on a Toyota RAV 4

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Spark plugs

To replace the spark plugs on a Toyota RAV 4, open the bonnet to access the components underneath. You will find the plastic cover on top of the engine block, allowing access to the underlying components. Disconnect the connectors attached to the coils by pulling them out of their housing. Once the coils are removed, use a socket wrench to pull the spark plugs from their housing and replace them with new spare parts.

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs on a Toyota RAV 4
How to Replace the Spark Plugs on a Toyota RAV 4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) To replace the spark plugs on a Toyota RAV 4, open the bonnet and remove the plastic cover from the top of the engine block. Once removed, disconnect…
How to Replace the Spark Plugs in a Toyota RAV4?
How to Replace the Spark Plugs in a Toyota RAV4?
Toyota Rav 4 (2000-2006 / Xa20, MK 2) To replace the spark plugs in a Toyota RAV4, open the bonnet to access the components located inside the engine bay. Here, you will identify the inta…
How to Replace the Spark Plugs on a Toyota RAV 4 2.0 VVT-I
How to Replace the Spark Plugs on a Toyota RAV 4 2.0 VVT-I
Toyota Rav 4 (2006-2013 / MK 3, Xa30) Below are the step-by-step instructions on how to remove and replace the spark plugs on a Toyota RAV 4 2.0 VVT-I. First, open the vehicle's bonnet an…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos