Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on a Toyota Tacoma?

Model: Toyota Tacoma N270, N260, N250, N240, N220, MK 2 - Years 2005-2015
Part: Service warning light

In this tutorial, you will see how to reset the oil change light on a Toyota Tacoma. This simple and quick operation should only be performed after you have changed the oil and the corresponding filter. To proceed with the reset, insert the key and turn on the ignition, then set the odometer display to "Trip A" using the button located below the fuel gauge. At this point, turn off the ignition and turn it back on while holding the same button. Release the button after seeing "000000" on the display.

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Engine Oil Change Light on the Toyota Tacoma n300
How to Reset the Engine Oil Change Light on the Toyota Tacoma n300
Toyota Tacoma (2016-2026 / N300) This guide shows how to reset the engine oil change light on the Toyota Tacoma n300. First, press the ignition button twice and select "Trip A" using…
How to reset the oil light on the Toyota Tacoma
How to reset the oil light on the Toyota Tacoma
Toyota Tacoma (2016-2026 / N300) If you want to manually reset the oil light on the display of the instrument panel of your latest model Toyota Tacoma, just follow the steps describe…
How to reset the service light on the 2013 Toyota Tacoma
How to reset the service light on the 2013 Toyota Tacoma
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2) The service light comes on when it is necessary to perform oil change operations inside the tank. The light related to the car service or oil change …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos