Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Tacoma
    4. : How to reset the oil light on the Toyota Tacoma.

Toyota Tacoma - Video tutorial

Model: Toyota Tacoma N300 - Years 2016-2024
Part: Instrument cluster
Operation: How to reset the oil light on the Toyota Tacoma.

When the oil warning light on the instrument panel of your 2016 Toyota Tacoma stays on even after a service, it means there is a small error and you need to proceed with a manual reset of the warning light. First, enter the vehicle and reach the driver's seat. Immediately press the ignition button twice consecutively and start the engine. Use the "Trip" button to display the "Trip A" option on the screen and finally, hold down the same button and restart the instrument panel to complete the reset.


Posted on 19 October 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos