Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windshield Wipers on a Toyota 4Runner?

Model: Toyota 4runner N210 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Windshield wipers

See other generations:
Video tutorial

Lift the arm of each wiper so that it is not in direct contact with the windshield. Once the wiper is raised, open the locking clip that connects the old wiper to the arm, releasing it. At this point, insert the new wiper into the end of the arm, securing it with the same pin; perform the same operation for the other wiper, positioning both on the windshield to verify that they work correctly.


Updated on 12 May 2026 by ScegliAuto


Related tutorials

Where to Find the Fuse Box in the Toyota 4Runner
Where to Find the Fuse Box in the Toyota 4Runner
Toyota 4runner (2002-2009 / N210) If you are experiencing issues with one or more electrical components in your Toyota 4Runner, don't worry because you can directly address them throu…
How to Replace the Cabin Air Filter on a Toyota 4Runner?
How to Replace the Cabin Air Filter on a Toyota 4Runner?
Toyota 4runner (2010-2024 / N280) To replace the cabin air filter on a Toyota 4Runner, open the glove compartment located on the passenger side. Inside the glove compartment, there wi…
How to Replace the Headlight Bulb on a Toyota 4Runner
How to Replace the Headlight Bulb on a Toyota 4Runner
Toyota 4runner (1996-2002 / N180) To replace the headlight bulb on a Toyota 4Runner, open the hood to access the back of the headlight by removing the circular plastic cover. Once thi…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos