Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on a Toyota Corolla

Model: Toyota Corolla MK 4, E170, E160 - Years 2013-2019
Part: Spark plugs

To replace the spark plugs on a Toyota Corolla, lift the bonnet to access the components inside. Remove the cover from the top of the engine block to unscrew the connectors attached to the ignition coils. Once these are disconnected, you can pull them out of their housing to remove the underlying spark plugs. After removing the spark plugs, insert the new ones and reassemble all the components you removed.

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the glow plugs in the Toyota Corolla?
How to replace the glow plugs in the Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) In this tutorial we can see how to replace the glow plugs in the Toyota Corolla, an extremely simple and quick operation. First of all, make sure the…
How to Replace the Front Brake Pads on a Toyota Corolla?
How to Replace the Front Brake Pads on a Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) To replace the front brake pads on a Toyota Corolla, lift the car with a jack so that the corresponding wheel is off the ground. Once the car is rais…
Guide to Removing the Timing Chain on a Toyota Corolla VVT-i
Guide to Removing the Timing Chain on a Toyota Corolla VVT-i
Toyota Corolla (2000-2007 / MK 2) This brief guide outlines the main steps to remove and replace the timing chain on a Toyota Corolla. To access the timing chain, you will need to rem…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos