Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Light Bulb on the Toyota Corolla

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tail light bulb

See other generations:
Video tutorial

If you need to replace the rear brake light bulb on your Toyota Corolla Mk3 but don't know how, don't worry because this mini guide will provide you with all the useful information to complete the task quickly and safely. First, lift the rear bonnet and remove the protective cover over the light containing the bulb to be replaced.

Disconnect the electrical connector and proceed with the bulb replacement. Then reconnect the connector and properly reposition the protective cover.

Finally, close the rear bonnet.


Updated on 13 May 2026 by ScegliAuto


Related tutorials

Replacement of the third brake light of the Toyota Corolla
Replacement of the third brake light of the Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) Today we will discover the instructions that will allow us to disassemble and replace the lights and the third brake light of the Toyota Corolla. Fir…
Replacing the rear light bulbs of the Toyota Corolla
Replacing the rear light bulbs of the Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Here are the instructions for removing and replacing the rear light bulbs of the Toyota Corolla. First, open the boot lid and start removing the side…
How to Replace the Rear Headlight Bulbs in a Toyota Corolla?
How to Replace the Rear Headlight Bulbs in a Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) Replacing the rear headlight bulbs in a Toyota Corolla is a straightforward task. First, remove the plastic rivets securing the inner panel in the bo…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos