Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Filter on the Toyota Innova Kijang

Model: Toyota Innova Kijang Crysta An40 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Diesel fuel filter

See other generations:
Video tutorial

In today's video, you will see the steps to remove and replace the fuel filter on the Toyota Innova Kijang by following these simple steps. First, open the hood and start by removing the battery by unscrewing the terminal bolts (positive and negative); then disconnect the electrical connector of the fuel filter and subsequently disconnect the hoses by loosening the metal clamps, as shown in the video.

At this point, replace the filter cartridge with a new one using the original part, following the video tutorial until the end!


Updated on 15 May 2026 by ScegliAuto


Related tutorials

How to Properly Position the Jack on the Toyota Innova Kijang Crysta
How to Properly Position the Jack on the Toyota Innova Kijang Crysta
Toyota Innova Kijang Crysta (2015-2023 / An140) This guide provides instructions on how to properly position the jack for removing and replacing the tire with the spare on the Toyota Innova Kijang …
How to Replace the Rear Brake Shoes on the Toyota Innova Kijang Crysta
How to Replace the Rear Brake Shoes on the Toyota Innova Kijang Crysta
Toyota Innova Kijang Crysta (2015-2023 / An140) Today, you will learn in this brief and simple guide how to disassemble and replace the rear brake shoes on the Toyota Innova Kijang Crysta. First, l…
How to Replace the Steering Wheel Airbag on the Toyota Innova Kijang Crysta
How to Replace the Steering Wheel Airbag on the Toyota Innova Kijang Crysta
Toyota Innova Kijang Crysta (2015-2023 / An140) Let's see in this brief and simple guide how to perform the removal and replacement of the steering wheel airbag on the Toyota Innova Kijang Crysta. …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos