Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on the Toyota Aygo?

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014
Part: Tire pressure warning light

To reset the tyre pressure light on the Toyota Aygo, first ensure all tyres are inflated to the correct pressure: this value is found on the sticker affixed to the driver’s door pillar. Once the tyres are inflated, turn the key to power on the instrument panel; then open the glove compartment on the passenger side, locating a button with the low tyre pressure icon at the top. Pressing and holding this button will reset the light on the instrument panel.

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Toyota Aygo
How to Reset the Tyre Pressure Warning Light on a Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) How to reset the tyre pressure warning light on a Toyota Aygo? To reset the tyre pressure warning light: turn on the ignition, use the button next to…
Resetting the Tyre Pressure Warning Light on the Toyota Aygo X
Resetting the Tyre Pressure Warning Light on the Toyota Aygo X
Toyota Aygo (2021-2026 / MK 3, Aygo X) In this guide, we will see the main instructions that will allow you to reset the tyre pressure warning light on the Toyota Aygo X; before performing…
How to Reset the Tyre Pressure Warning Light on a Toyota Aygo?
How to Reset the Tyre Pressure Warning Light on a Toyota Aygo?
Toyota Aygo (2005-2014 / MK 1, Ab10) To reset the tyre pressure warning light on a Toyota Aygo, first ensure all tyres are inflated to the correct pressure. This information is found on …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos