Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Kick Plate on the Toyota Fortuner

Model: Toyota Fortuner An160 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024

See other generations:
Video tutorial

If you want to protect your car's floor mats from wear, you can install a kick plate (aftermarket product). First, open the driver's side door and remove the floor mat. Then take the metal plate and position it to fit. After that, remove the protective plastic film.

Install the four locking screws for the plate, pre-drilling the floor mat, and then secure the nut on the back of the mat to lock the plate in place. Repeat this process for all four screws.

Finally, take the floor mat and put it back in the car.


Updated on 17 May 2026 by ScegliAuto


Related tutorials

How to Replace the License Plate Bulb on a Toyota Fortuner/Hilux
How to Replace the License Plate Bulb on a Toyota Fortuner/Hilux
Toyota Fortuner (2015-2024 / An160) This video shows how to replace the license plate bulb on a Toyota Fortuner/Hilux: insert a small screwdriver into the hole located between the body …
Where is the fuse box of the Toyota Fortuner located?
Where is the fuse box of the Toyota Fortuner located?
Toyota Fortuner (2015-2024 / An160) In the following guide aimed at all of you who own a second-generation Toyota Fortuner, we will describe all the steps you need to take if you intend…
How to set the correct time on the Toyota Fortuner.
How to set the correct time on the Toyota Fortuner.
Toyota Fortuner (2015-2024 / An160) In this new guide, we will explain how you can set the correct time on your second-generation Toyota Fortuner. First of all, get inside the car and t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos