Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Cover on the Toyota Hi Lux

Model: Toyota HiLux An30, An20, MK 7, An10 - Years 2005-2015
Part: Key

If the key cover of your Toyota Hi Lux Mk1 shows excessive signs of wear and you want to replace it, carefully read this new guide and follow the instructions. First, completely disassemble the worn key to remove the physical emergency key and the battery inside. Next, insert the physical key into the new cover, add the various buttons and the battery, and finally close the cover. At this point, the procedure is complete, and you can test its functionality.

Updated on 20 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the battery in the key of the Toyota Hi Lux
How to replace the battery in the key of the Toyota Hi Lux
Toyota HiLux (2015-2024 / An130, An120, MK 8) To complete the replacement of the battery located inside the key of your Toyota Hi Lux, all you need to do is follow the steps described in our new …
How to replace the timing belt of the 2013 Toyota Hi Lux
How to replace the timing belt of the 2013 Toyota Hi Lux
Toyota HiLux (2005-2015 / An30, An20, MK 7, An10) After 60,000 kilometers it is time to replace the timing belt of the Toyota Hi Lux. Today's video will show you the steps to replace the belt of a 20…
How to Replace the Key Battery of the Toyota Hi Lux
How to Replace the Key Battery of the Toyota Hi Lux
Toyota HiLux (2015-2024 / An130, An120, MK 8) If your Toyota Hi Lux key has suddenly stopped working, you may need to replace the battery. Below, you will find the steps required to perform this …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos