Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Clutch in a Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Clutch

See other generations:
Video tutorial

In this video, you will learn how to adjust the clutch in a Toyota Yaris. With the gearbox on the ground, locate the clutch actuator and move it to the end of the slotted holes, bringing it closer to the screws.

With the gearbox installed, fit the pin included in the clutch kit. Now install the template with the grinding tool included in the clutch kit as shown in the video. At this point, unscrew the fixing screws and allow the spring to act. Tighten the three fixings of the clutch actuator to a torque of 15Nm. Check for any play between the clutch actuator and the push rod. Now remove the tools that were previously installed.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Adjust the Clutch Pedal of the Toyota Yaris?
How to Adjust the Clutch Pedal of the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) To adjust the clutch pedal of the Toyota Yaris, locate the mechanism that operates the clutch master cylinder, which is positioned at the rear of the…
How to Replace the Clutch on the Toyota Yaris?
How to Replace the Clutch on the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) To replace the clutch on the Toyota Yaris, open the bonnet to access the components inside the engine bay. From here, you will need to unscrew the bo…
How to Remove the Gearbox and Clutch on a Toyota Yaris 1.0
How to Remove the Gearbox and Clutch on a Toyota Yaris 1.0
Toyota Yaris (2005-2011 / Xp90) This video tutorial outlines the steps to remove the gearbox and replace the clutch on a Toyota Yaris 1.0. First, lift the vehicle and begin by remov…

    Frequently Asked Questions

    • Yaris 2005-2011 - How much does the Toyota Yaris clutch cost? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos