Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Fortuner
    4. : How to replace the wheel with the spare wheel of the Toyota Fortuner

Toyota Fortuner - Video tutorial

Model: Toyota Fortuner An160 - Years 2015-2023
Part: Wheel
Operation: How to replace the wheel with the spare wheel of the Toyota Fortuner

Let's see in this guide how to remove and replace the wheel with the spare wheel of the Toyota Fortuner, following the instructions below. First of all, we open the tailgate of the boot and begin to equip ourselves with all the kit necessary for replacing the wheel; then we unscrew the spare wheel screw to get it off the floor, as shown in the video. At this point we loosen the wheel bolts and lift the car with the jack; we replace the wheel with the spare one, screwing the bolts by hand and then tighten them crosswise, following the video to the end!


Posted on 19 May 2024 by ScegliAuto



Where is the fuse box located in the Toyota Fortuner?
Toyota Fortuner (2005-2015 / An50, An60) If your Toyota Fortuner is experiencing electrical problems and you want to work on one or more fuses, then all you have to do is carefully read the
How to replace the Toyota Fortuner remote control battery?
Toyota Fortuner (2015-2023 / An160) In this tutorial we can see how to replace the Toyota Fortuner remote control battery. For this simple and quick operation, we will not need any part
How to reset service in Toyota Fortuner?
Toyota Fortuner (2015-2023 / An160) In this tutorial we can see how to reset the service in the Toyota Fortuner, a very simple and fast operation. Before proceeding, we will obviously h

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos