Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Shift Selector Bulb on a Toyota Fortuner?

Model: Toyota Fortuner An160 - Years 2015-2024
Part: Light bulb

To replace the shift selector bulb on a Toyota Fortuner, remove the shift knob and disconnect the plastic panel at the base of the parking brake lever. Once these are removed, you can detach the entire cover along the center tunnel and around the selector. This will allow you to disconnect the underlying bulb from its connector and replace it with a new part; after the replacement, reinstall all the center tunnel covers that were previously removed.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove an HID Bulb from the Toyota Fortuner?
How to Remove an HID Bulb from the Toyota Fortuner?
Toyota Fortuner (2005-2015 / An50, An60) In this tutorial, you will see how to remove an HID bulb from the front headlamp of the Toyota Fortuner, a very simple operation. First, to work safe…
How to Replace the License Plate Bulb on a Toyota Fortuner/Hilux
How to Replace the License Plate Bulb on a Toyota Fortuner/Hilux
Toyota Fortuner (2015-2024 / An160) This video shows how to replace the license plate bulb on a Toyota Fortuner/Hilux: insert a small screwdriver into the hole located between the body …
How to set the correct time on the Toyota Fortuner.
How to set the correct time on the Toyota Fortuner.
Toyota Fortuner (2015-2024 / An160) In this new guide, we will explain how you can set the correct time on your second-generation Toyota Fortuner. First of all, get inside the car and t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos