Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Washer Reservoir of the Toyota Corolla?

Model: Toyota Corolla MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the windscreen washer reservoir of the Toyota Corolla, loosen the rivets securing the front bumper from inside the wheel arch, so that the bumper can be completely removed. Underneath, directly in front of the right front wheel, you will find the washer reservoir that needs to be freed from its housing by disconnecting the hoses and unscrewing the mounting screws.

Once the old reservoir has been completely removed, insert the new replacement part, reattaching the bumper as well.


Updated on 26 May 2026 by ScegliAuto


Related tutorials

Where Are the Fuses on a Toyota Corolla?
Where Are the Fuses on a Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) Any fuse in a Toyota Corolla is located inside one of the two fuse boxes present in the vehicle. The first is found in the lower left area relative t…
Where are the Fuses Located in the Toyota Corolla?
Where are the Fuses Located in the Toyota Corolla?
Toyota Corolla (2019-2026 / MK 5, E210) Each fuse in the Toyota Corolla is located inside one of the two fuse boxes present in the vehicle. The first is found at the bottom left of the stee…
Where are the Fuses in the Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) In the Toyota Corolla, all fuses are located within their respective fuse boxes inside the vehicle. The first box is positioned at the bottom left of…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos