Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the key battery on a Toyota Tacoma

Model: Toyota Tacoma N170, N160, N150, N140, N190 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Key

See other generations:
Video tutorial

Need to replace the battery in the remote key for this vehicle? Follow the instructions below and check out the video as well. To proceed, you will need a small screwdriver to pry open and detach the back cover of the remote.

Under it, you will find the slot where the battery is housed. Always use the pointed object to pry it out and replace it with the new one, ensuring the polarity is correct (positive terminal facing outward).

Then, reposition the cover and snap it back into place.


Updated on 27 May 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery on the Toyota Tacoma [USA]
How to Replace the Key Fob Battery on the Toyota Tacoma [USA]
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) To replace the key fob battery on the Toyota Tacoma, follow these steps. Insert a screwdriver into the gap between the two halves of the key and pry …
How to replace the battery of the Toyota Tacoma key
How to replace the battery of the Toyota Tacoma key
Toyota Tacoma (2016-2026 / N300) If you own the new Toyota Tacoma and want to learn how to replace the battery inside the key, then all you have to do is read the following guide and…
How to Replace the Remote Battery of the Toyota Tacoma N300
How to Replace the Remote Battery of the Toyota Tacoma N300
Toyota Tacoma (2016-2026 / N300) This guide shows you how to disassemble and replace the battery of the remote key for the Toyota Tacoma N300 by following these simple steps. First, …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos