Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of the Toyota Tacoma N300

Model: Toyota Tacoma N300 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Key

See other generations:
Video tutorial

This guide shows you how to disassemble and replace the battery of the remote key for the Toyota Tacoma N300 by following these simple steps. First, take your remote and start by removing the physical key from inside it; then, use the gap created to pry open the remote into two parts, accessing the battery as shown in the video.

At this point, remove and replace the battery with a new one of the correct type (in this case, a CR2032 3V); insert it in the correct orientation and reassemble the two halves.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery in a Toyota Tacoma?
How to Replace the Key Fob Battery in a Toyota Tacoma?
Toyota Tacoma (2016-2026 / N300) In this tutorial, you will learn how to replace the key fob battery in a Toyota Tacoma, a very simple and quick operation. You will need a replacemen…
How to Replace the Remote Battery in a Toyota Tacoma?
How to Replace the Remote Battery in a Toyota Tacoma?
Toyota Tacoma (2016-2026 / N300) Opening the remote for the Toyota Tacoma and replacing the dead battery is a very simple and quick task. Here’s how to proceed in this tutorial. Firs…
How to Replace the Remote Battery of the Toyota Tacoma?
How to Replace the Remote Battery of the Toyota Tacoma?
Toyota Tacoma (2016-2026 / N300) To replace the remote battery of the Toyota Tacoma, pry open the bottom of the device using a tool like a screwdriver. Once the device is open, you c…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos