Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Toyota Tacoma

Model: Toyota Tacoma MK 2, N220, N240, N250, N260, N270 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Battery

See other generations:
Video tutorial

Want to tackle the battery replacement on this vehicle model yourself? The description below and the video provide all the useful information and the necessary procedure to follow for a correct and safe replacement. The battery is located on the left side of the engine compartment and is secured by an upper support bracket that you need to remove by unscrewing the mounting screws.

Then disconnect the negative terminal first, followed by the positive terminal. Next, pull the battery out of the compartment and replace it with the new one, then reattach the upper support bracket and reconnect the positive terminal first, then the negative terminal.


Updated on 29 July 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery of the Toyota Tacoma?
How to Replace the Remote Battery of the Toyota Tacoma?
Toyota Tacoma (2016-2026 / N300) To replace the remote battery of the Toyota Tacoma, pry open the bottom of the device using a tool like a screwdriver. Once the device is open, you c…
How to Replace the Battery in a Toyota Tacoma
How to Replace the Battery in a Toyota Tacoma
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) The video explains the steps on how to replace the battery in a Toyota Tacoma pickup truck. As the first step, ensure the vehicle is off and open the…
How to Replace the Battery in a Toyota Tacoma
How to Replace the Battery in a Toyota Tacoma
Toyota Tacoma (2016-2026 / N300) This guide outlines the steps to disassemble and replace the engine battery in a Toyota Tacoma, following the instructions below. First, open the hoo…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos