Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Tacoma
    4. : How to replace the Toyota Tacoma battery

Toyota Tacoma - Video tutorial

Model: Toyota Tacoma N300 - Years 2016-2024
Part: Battery
Operation: How to replace the Toyota Tacoma battery

Let's see in this guide the steps on how to disassemble and replace the Toyota Tacoma engine battery, following the instructions below. First of all we open the bonnet and start by unscrewing the two nuts of the central battery bracket; to do this we use a 10 mm socket wrench, as shown in the video. At this point we use the same key to unscrew our battery terminals (positive and negative pole); we just have to replace it with the new one, with one of the same amperage, and reassemble everything, applying the reverse procedure.


Posted on 6 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos