Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Battery on a Toyota Tacoma

Model: Toyota Tacoma N300 - Years 2016-2026
Part: Battery

Follow these instructions to replace the battery on this vehicle model. After opening the hood, locate the battery on the left side. Grab a wrench to remove the nuts securing the upper mounting bracket. Disconnect the negative terminal first, then the positive terminal. Remove the old battery and replace it with the new one. Reconnect the positive terminal first, then the negative terminal, and finally reattach the upper mounting bracket.

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Tacoma (2016-2026 / N300) To replace the remote battery of the Toyota Tacoma, pry open the bottom of the device using a tool like a screwdriver. Once the device is open, you c…
Toyota Tacoma (2016-2026 / N300) In order to replace the battery of the Toyota Tacoma remote control, you need to detach the cover located on the top of the device: once this small p…
Toyota Tacoma (2016-2026 / N300) If you own the new Toyota Tacoma and want to learn how to replace the battery inside the key, then all you have to do is read the following guide and…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos