Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Tacoma
  6. : How to replace the battery of the Toyota Tacoma pickup remote control?

Toyota Tacoma - Video tutorial

Model: Toyota Tacoma N300 - Years 2016-2024
Part: Key
Operation: How to replace the battery of the Toyota Tacoma pickup remote control?

In this tutorial, we can see how to replace the battery of the Toyota Tacoma pickup remote control, an extremely simple and quick operation. To do this, we will need a replacement battery of type CR2032 and, if necessary, a small flat-tipped screwdriver. First, we extract the emergency metal key by pressing the appropriate button, then we use the key itself to leverage into the indicated slot and unlock the rear door. Next, we remove the old battery, place the replacement battery in the correct direction, and reassemble everything.


Posted on 2 December 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos