Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery in a Toyota Tacoma?

Model: Toyota Tacoma N300 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Key

See other generations:
Video tutorial

Opening the remote for the Toyota Tacoma and replacing the dead battery is a very simple and quick task. Here’s how to proceed in this tutorial.

First, press the side button and remove the emergency metal key. Next, insert the tip of the key into the indicated slot, leverage it by turning, and open the rear cover. At this point, remove the internal circuit, where the battery is located on the back.

Remove the old battery and insert the replacement, model CR2032, making sure to position the positive terminal facing up. Finally, reassemble everything by following the reverse procedure.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery of the Toyota Tacoma?
How to Replace the Remote Battery of the Toyota Tacoma?
Toyota Tacoma (2016-2026 / N300) To replace the remote battery of the Toyota Tacoma, pry open the bottom of the device using a tool like a screwdriver. Once the device is open, you c…
How to Replace the Remote Battery of the Toyota Tacoma N300
How to Replace the Remote Battery of the Toyota Tacoma N300
Toyota Tacoma (2016-2026 / N300) This guide shows you how to disassemble and replace the battery of the remote key for the Toyota Tacoma N300 by following these simple steps. First, …
How to Replace the Remote Battery in a Toyota Tacoma?
How to Replace the Remote Battery in a Toyota Tacoma?
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) .. In this tutorial, we will see how to replace the remote battery in a Toyota Tacoma, a very simple and quick operation. For this, you.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos