Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the Toyota Yaris Hybrid battery

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Battery

This guide will show the service battery replacement procedure for the Toyota Yaris Hybrid. It is advisable to follow this procedure only if the instrument panel shows no signs of life when it is switched on or if there are flickering or graphic artifacts in the interface on the dashboard. He said this, to proceed, the following steps must be followed: 1. Unscrew the clips placed on the rear right seat; 2. Lift the seat slightly and push the battery compartment underneath to remove the battery; 3. Unhook the interlocking red cover; 4. Unscrew the positive screw and then also the negative screw using a screwdriver with tip 10; 5. Remove the terminals; 6. Remove the old battery and replace it with the new spare by repeating the procedure in reverse and respecting the respective battery housing holes during assembly, also taking care not to strip the screws. Once the procedure has been completed, turn on the instrument panel to check that everything has been done correctly.


Posted on 3 June 2024 by ScegliAuto



Where is the battery located in the Toyota Yaris Hybrid?
Toyota Yaris (2020-2024 / MK 4) Unlike many Toyota models, the Yaris Hybrid places the battery inside the vehicle. The battery of the Toyota Yaris Hybrid is actually located inside
Toyota yaris Hybrid battery removal
Toyota Yaris (2011-2019 / Xp130) In this video tutorial we will illustrate how to remove the battery of a Toyota Yaris Hybrid. First of all, the battery is located under the bonnet:
How do you replace the battery of the Toyota Yaris Hybrid?
Toyota Yaris (2011-2019 / Xp130) In order to replace the battery of the Toyota Yaris Hybrid, you need to loosen the screws that fix the rear seat bench of the car: by loosening these

Other guides that may interest you

    Frequently Asked Questions

    • Yaris 2020-2027 - Where is the Toyota Yaris Hybrid battery located? Read Answer

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos