Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Rav 4
    4. : How to recline the rear seats in Toyota RAV4?

Toyota Rav 4 - Video tutorial

Model: Toyota Rav 4 MK 2, Xa20 - Years 2000-2006
Part: Rear bench seat
Operation: How to recline the rear seats in Toyota RAV4?

In this tutorial we can see how to fold the rear seats in the Toyota RAV4, an extremely simple and fast operation, to be carried out if we need more space in the trunk. Let's start by opening the tailgate and the two rear doors, then locate the upper lever of the left seat, pull it upwards and lower the backrest completely. Once this is done, let's go to the opposite side and repeat the operation for the second backrest. At this point, from the luggage compartment, we activate the lever located on the lower edge of both seats and push them forward, thus creating additional space.


Posted on 5 June 2024 by ScegliAuto



How to remove the rear seats on the Toyota Rav4 MK5
Toyota Rav 4 (2019-2024 / MK 5, Xa50) In this video tutorial we will see how to remove the rear seats on Toyota RAV 4 fifth series, following these simple steps. First of all, we open the
How to remove the rear seats in the Toyota RAV4?
Toyota Rav 4 (2019-2024 / MK 5, Xa50) In this tutorial we can see how to remove the rear seats in the Toyota RAV4, an extremely simple and quick operation. First of all, we open both the
Where is the fuel pump located in the Toyota RAV4?
Toyota Rav 4 (2000-2006 / MK 2, Xa20) In this video, we can see where the fuel pump is located in the Toyota RAV4 and how to proceed in case we need to replace it. As shown, the pump is l

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos