Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Speakers in a Toyota Highlander

Model: Toyota Highlander Xu50 - Years 2014-2019
Part: Car stereo

Today we will see how to replace the speakers in the audio system of a Toyota Highlander. First, detach the protective grille using a trim tool, being careful not to damage the clips. Once the grille is removed, unscrew the 2 screws that secure the speaker housing to the dashboard. If the new speakers have spade connectors, you will need to cut the original connectors. Now, after stripping the 2 wires, obtain a cable that ends with female spade connectors. Connect the wires with appropriate connectors and using a crimping tool, connect the female spade connectors to the male ones of the new speakers. Now place the speakers in their slots and screw in the 2 securing screws. Finally, insert the corresponding grille. Repeat the operation for the other speaker. Now turn on the car radio and test the result of your work.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Highlander (2014-2019 / Xu50) Follow this brief and simple guide to remove and replace the battery of the Toyota Highlander Xu50, following the instructions below. First, open the…
Toyota Highlander (2014-2019 / Xu50) Replacing the remote battery on a Toyota Highlander, as seen in this tutorial, is an extremely simple and quick operation. For this, you will not nee…
Toyota Highlander (2008-2013 / Xu40) This guide provides instructions for removing and replacing the cabin air filter on a Toyota Highlander. First, get inside the vehicle on the front p…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos