Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Front Bumper Grille of the Toyota Highlander 1

Model: Toyota Highlander Xu20 - Years 2001-2007
Part: Grille

In today's video, see how to remove and replace the front bumper grille of the first series Toyota Highlander. First, open the bonnet and start by removing all the plastic clips from the grille located at the top of the bumper; then unscrew the internal screws using a socket wrench to remove and replace the grille with the new one, as shown in the video. At this point, reinstall the new grille, paying attention to the condition of the support; then reassemble everything by applying the reverse procedure!

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Highlander (2008-2013 / Xu40) In this tutorial video, you will see how to remove the front headlight of the first generation Toyota Highlander. Open the bonnet and disconnect all …
Toyota Highlander (2020-2026 / Xu70) To deactivate the tailgate opening chime on the Toyota Highlander, access the lower part of the rear bumper to locate the cables in this position. He…
Toyota Highlander (2014-2019 / Xu50) Today's steps will show us how to disassemble and replace the front headlight of the Toyota Highlander, following the instructions below. First, we o…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos