Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Horn on a Toyota Highlander

Model: Toyota Highlander Xu20 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007

See other generations:
Video tutorial

In this brief and simple guide, follow the instructions to remove and replace the horn or sounder on the Toyota Highlander. First, open the bonnet of your car and start removing the front bumper grille; to do this, remove all the plastic clips found at the top, as shown in the video.

At this point, disconnect the electrical connectors of the horn by unscrewing the bracket screws to remove it and replace it with the new one; secure it properly and connect the wiring, following the video tutorial to the end!


Updated on 19 July 2026 by ScegliAuto


Related tutorials

Where are the fuses located in the Toyota Highlander?
Where are the fuses located in the Toyota Highlander?
Toyota Highlander (2014-2019 / Xu50) Each fuse in the Toyota Highlander is located inside one of the dedicated fuse boxes installed in the vehicle: in this type of vehicle, you can find …
Where is the fuse box located in the interior of the Toyota Highlander?
Where is the fuse box located in the interior of the Toyota Highlander?
Toyota Highlander (2001-2007 / Xu20) If you are looking for the fuse box of the first generation Toyota Highlander, just follow the guide below. First, get into the car and make sure it …
How to Reset the Tyre Light on a 2016 Toyota Highlander
How to Reset the Tyre Light on a 2016 Toyota Highlander
Toyota Highlander (2014-2019 / Xu50) If you own a 2016 Toyota Highlander and want to know how to manually reset the tyre light, simply follow the steps described below and put them into …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos