Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Rear Headlight Bulbs on a Toyota Tacoma 2

Model: Toyota Tacoma N270, N260, N250, N240, N220, MK 2 - Years 2005-2015
Part: Tail light bulb

Today, you will learn how to remove the rear headlight and replace the bulbs on a second-generation Toyota Tacoma. First, open the tailgate and start by unscrewing the screws located on the side of the headlight using a socket wrench; then remove the rear light by disconnecting and removing the bulbs, as shown in the video. At this point, replace any damaged bulbs with new ones, inserting them correctly into the socket; finally, reattach the rear headlight!

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulbs in a Toyota Tacoma
How to Replace the Headlight Bulbs in a Toyota Tacoma
Toyota Tacoma (2016-2026 / N300) In this guide, discover how to replace the headlight bulbs in a Toyota Tacoma. To start, remove the two screws on the side of the headlight, as shown…
How to Replace the Rear Headlight Bulb on a Toyota Tacoma?
How to Replace the Rear Headlight Bulb on a Toyota Tacoma?
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2) To replace the rear headlight bulb on a Toyota Tacoma, lower the tailgate so you can access the screws on the side of the headlight. Once these screw…
Removing the Front Headlight of the Toyota Tacoma MK2
Removing the Front Headlight of the Toyota Tacoma MK2
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2) In this video, see how to remove and replace the headlight assembly or front headlight of the second generation Toyota Tacoma by following these simp…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos