Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Speakers on the Toyota Corolla

Model: Toyota Corolla MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Speaker

See other generations:
Video tutorial

This guide provides instructions on how to remove and replace the front speakers on the Toyota Corolla in simple, quick steps. First, open the front door of your car and start removing the front door panel; to do this, remove the plastic covers, unscrewing the fixing screws located underneath, and take out the window switch panel as shown in the video.

At this point, unscrew the fixing screws of the speaker, disconnecting the electrical connector found at the back; then, install the new speaker by following the reverse procedure!


Updated on 5 June 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulbs on a Toyota Corolla?
How to Replace the Headlight Bulbs on a Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) In this tutorial, you will see how to replace the headlight bulbs on a Toyota Corolla, a very simple and quick operation. First, ensure that the key …
How to replace the front seatbelt buckles in the Toyota Corolla?
How to replace the front seatbelt buckles in the Toyota Corolla?
Toyota Corolla (2000-2007 / MK 2) In this tutorial, you can see how to replace the front seatbelt buckles in the Toyota Corolla, a very simple and quick operation. First, enter the ve…
Removing the Front Seats on the Toyota Corolla (2018)
Removing the Front Seats on the Toyota Corolla (2018)
Toyota Corolla (2013-2019 / E160, E170, MK 4) This video shows how to remove the front seats on the 2018 Toyota Corolla in simple steps. First, open the bonnet and disconnect the battery; then, o…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos