Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where Are the Starter Motor Fuses Located in the Toyota Yaris?

Model: Toyota Yaris Xp10 - Years 1999-2005
Part: Starter motor

In this video, you will see where the starter motor fuses are located in the Toyota Yaris, the first elements to check if it is malfunctioning. As shown, there are two fuses, both located in the box inside the engine compartment, to the right of the battery, labelled F4 and F5. Their amperage is 15A and 30A respectively. If a fuse is faulty, ensure you replace it with a spare of the same specifications; otherwise, you may damage all connected devices.

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to find and how to test the fuse and relay of the starter motor of the Toyota Yaris.
Where to find and how to test the fuse and relay of the starter motor of the Toyota Yaris.
Toyota Yaris (2011-2019 / Xp130) The video shows the location and test of the fuse and relay of the starter motor of a Toyota Yaris: both are located in the engine compartment, insid…
Replacement of the starter motor of the Toyota Yaris
Replacement of the starter motor of the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) The following steps will show us how to disassemble and replace the starter motor of the Toyota Yaris. First, we open the engine hood of the car and …
Where is the starter motor located in the Toyota Yaris?
Where is the starter motor located in the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) In this video, you can see where the starter motor is located in the Toyota Yaris and how to proceed if you need to replace it, a relatively simple o…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos