Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the Toyota Highlander

Model: Toyota Highlander Xu40 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

The oil light serves as a reminder to inform the driver that an oil change is necessary. If this operation has already been performed, but the warning light continues to appear on the dashboard, you need to perform a manual reset.

To do this, turn on the ignition and press the button located below the speedometer. Once the display shows "Trip", turn off the ignition and hold the same button for a few seconds.

At the same time, turn on the ignition. Once the reset is confirmed, release the button.

The operation is complete.


Updated on 8 June 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on a 2012 Toyota Highlander
How to Reset the Oil Light on a 2012 Toyota Highlander
Toyota Highlander (2008-2013 / Xu40) If the oil light on the instrument cluster of your 2012 Toyota Highlander remains illuminated despite having been recently changed, do not worry beca…
How to Reset the Oil Light on the 2020 Toyota Highlander
Toyota Highlander (2020-2026 / Xu70) To manually reset the engine oil light on the dashboard of your 2020 Toyota Highlander, follow the procedure described in this mini guide. First, par…
How to reset the tyre warning light in the Toyota Highlander?
How to reset the tyre warning light in the Toyota Highlander?
Toyota Highlander (2014-2019 / Xu50) In this video, you can see how to reset the tyre warning light in the Toyota Highlander. This light appears whenever low pressure is detected, for ex…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos