Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Highlander
    4. : To reset the oil light on the 2012 Toyota Highlander.

Toyota Highlander - Video tutorial

Model: Toyota Highlander Xu40 - Years 2008-2013
Part: Instrument cluster
Operation: To reset the oil light on the 2012 Toyota Highlander.

If the engine oil light on your 2012 Toyota Highlander's instrument panel continues to stay on, even though it has recently been changed, don't worry because you can manually reset the light. Let's find out how to do it. First, turn on the ignition and make sure that the total mileage is displayed. If it is not, press the button located inside the speedometer until it appears on the display. At this point, turn off the ignition and hold down the same button used earlier. Turn on the ignition again and complete the reset of the light.


Posted on 10 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Toyota Highlander 2014-2019 - What does the red VSC light on the Toyota Highlander mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos