Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a Toyota Highlander

Model: Toyota Highlander Xu40 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

After each oil change, the corresponding sensor must be reset; otherwise, the same warning light will continue to appear on your dashboard display. Fortunately, the entire operation is quite simple and can be done in just a few seconds.

First, press the "Start" button and turn on the ignition. Next, locate the button situated on the speedometer and hold it down for a few seconds.

At the same time, turn off the ignition. Once this is done, press and hold the same button again and turn on the ignition.

The reset is complete, and the light will no longer appear.


Updated on 7 May 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on a 2012 Toyota Highlander
How to Reset the Oil Light on a 2012 Toyota Highlander
Toyota Highlander (2008-2013 / Xu40) If the oil light on the instrument cluster of your 2012 Toyota Highlander remains illuminated despite having been recently changed, do not worry beca…
How to Reset the Oil Light on the 2020 Toyota Highlander
Toyota Highlander (2020-2026 / Xu70) To manually reset the engine oil light on the dashboard of your 2020 Toyota Highlander, follow the procedure described in this mini guide. First, par…
How to reset the tyre warning light in the Toyota Highlander?
How to reset the tyre warning light in the Toyota Highlander?
Toyota Highlander (2014-2019 / Xu50) In this video, you can see how to reset the tyre warning light in the Toyota Highlander. This light appears whenever low pressure is detected, for ex…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos