Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Timing Belt on a Toyota Engine

Model: Toyota Toyota Various
Part: Timing belt

This video tutorial demonstrates how to replace the timing belt, showing step by step the operations to be carried out. The timing belt is a crucial component that must be replaced periodically as it wears and can gradually harden over time; if even one tooth of the belt breaks, the engine may stop suddenly and the valve mechanism could be damaged, especially in Diesel engines. The main components of the timing belt are shown in the video. The procedure for replacing the timing belt varies depending on the car model and engine; however, the sequence of operations remains the same. First, remove the timing belt, second, remove the rocker cover, third, position cylinder number one at top dead centre on the compression stroke; fourth, remove the crankshaft pulley; fifth, replace the timing belt; sixth, reassemble the removed parts.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Toyota Various To replace the timing chain on a Toyota 1.4 D-4D engine, first remove the engine from its housing. This allows you to loosen the bolts securing the v…
Toyota Toyota Various The reset of the service light on a Toyota Agya vehicle should only be performed after completing the operations related to the car service. The rese…
Toyota Toyota Various To replace the engine air filter on your first-generation Toyota Wigo, follow these simple steps outlined in this guide. First, lift the bonnet and l…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos