Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the VSC in a Toyota Rav 4?

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

In today's video, we will see how to deactivate the electronic stability control system, or ESP, in the third generation Toyota Rav 4. As there is no dedicated button, the operation may be more complicated than in other cars. Here is the illustrated procedure: Start the engine without pressing the brake.

Now pull the handbrake and then press the brake pedal twice. Now release the handbrake lever.

Hold the brake pedal down and pull and release the handbrake twice. Release the brake and then pull the handbrake again.

The warning light should now appear on the instrument panel.


Updated on 13 June 2026 by ScegliAuto


Related tutorials

How to Reset and Disable the Engine and VSC Light on a Toyota RAV4
How to Reset and Disable the Engine and VSC Light on a Toyota RAV4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) This brief guide provides instructions for resetting the engine light and disabling the VSC and traction control on a Toyota RAV4. To perform these o…
How to Disable VSC on a 2007 Toyota RAV4
How to Disable VSC on a 2007 Toyota RAV4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) To disable the VSC system on a 2007 Toyota RAV4, start the engine without pressing the brake pedal. Pull the handbrake and then press the brake pedal…
How to Activate and Deactivate Traction and Stability Control on the Toyota RAV4
How to Activate and Deactivate Traction and Stability Control on the Toyota RAV4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) Here’s how to activate the traction control (TRC) and stability control (VSC) on the Toyota RAV4: the TRC prevents wheel slip by reducing engine powe…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos