Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Rav 4
    4. : How do you reset the tire warning light in the Toyota RAV4?

Toyota Rav 4 - Video tutorial

Model: Toyota Rav 4 MK 5, Xa50 - Years 2019-2024
Part: Tires
Operation: How do you reset the tire warning light in the Toyota RAV4?

Following a puncture, a tire change, or simply a disconnection and reconnection of the vehicle battery cables, the tire pressure fault warning light appears on the instrument panel display, accompanied by a warning message. If this happens, the latter must be reset, proceeding exactly as shown in the video. You access the aforementioned display, with the multifunction button located on the left of the steering wheel and always from the same, you go to select the item concerning the tires. When the reset is proposed to us, it will be sufficient to click on Yes and we will have completed the operation.


Posted on 21 October 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Rav 4 2013-2018 - When does the tire warning light illuminate on the Toyota RAV 4? Read Answer
    • Rav 4 2019-2026 - Tire warning light on Toyota Rav 4, what to do? Read Answer
    • Rav 4 2013-2018 - Tire warning light reset on Toyota Rav4 Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos