Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Toyota RAV4

Model: Toyota Rav 4 Xa50, MK 5 - Years 2019-2026
Part:

This tutorial shows you how to reset the tyre pressure warning light on a fifth-generation Toyota RAV4. Start by turning on the vehicle's ignition. Then, press the right arrow on the steering wheel to open the menu on the information display of the speedometer. Select the vehicle settings option and then the tyre pressure option. Now, press and hold the "OK" button on the "Set Pressure" option to perform the reset. Only carry out this operation when the pressure of all four tyres is correct as specified by the manufacturer.

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Warning Light on the Toyota RAV4
How to Reset the Tyre Warning Light on the Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) To manually reset the tyre warning light on your Toyota RAV4 fourth generation (2013-2018), follow these simple steps. First, enter the cabin and tur…
How to Reset the Tyre Pressure Warning Light on a Toyota RAV4
How to Reset the Tyre Pressure Warning Light on a Toyota RAV4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) In this short and simple guide, you will learn how to reset the tyre pressure warning light (TPMS) on a Toyota RAV4. Initially, when you turn on the …
How to Reset the Tyre Warning Light on the Toyota RAV4
How to Reset the Tyre Warning Light on the Toyota RAV4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) If the orange tyre warning light on the instrument panel of your third-generation Toyota RAV4 (2012 model) comes on, it indicates a loss of pressure …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos