Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Toyota RAV 4

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Headlight bulb

If you want to learn how to replace the front headlamp bulb on your Toyota RAV 4 (2013-2018), carefully read the following instructions and put them into practice. First, turn off the car and go to the outside area. Then, lift the bonnet and disconnect the electrical connector located inside the engine bay, just behind the headlamp that needs replacing. Next, remove the protective cover and proceed with the bulb replacement. Finally, reassemble everything correctly and you are finished.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Toyota RAV4?
How to Replace the Front Headlamp Bulb on a Toyota RAV4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) To replace the front headlamp bulb on a Toyota RAV4, open the bonnet to access the rear of the corresponding headlamp. Here, you will find the connec…
How to Replace the Headlight Bulbs of a Toyota Rav 4
How to Replace the Headlight Bulbs of a Toyota Rav 4
Toyota Rav 4 (2000-2006 / Xa20, MK 2) How to replace the headlight bulbs of a Toyota Rav 4? Learn how to proceed in the video. Open the engine bonnet by pulling the lever located at the b…
Replacing the Front Headlamp Bulb of a Toyota Rav 4
Replacing the Front Headlamp Bulb of a Toyota Rav 4
Toyota Rav 4 (2000-2006 / Xa20, MK 2) Today, we will see in this video tutorial how to remove and replace the front headlamp bulb of a Toyota Rav 4 in simple and quick steps. First, open …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos