Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light Bulbs on the Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Light bulb

See other generations:
Video tutorial

In today's video, you will learn how to replace the fog light bulbs on the third generation Toyota Yaris. First, turn the steering wheel in the opposite direction to the side you are working on. Remove the fixing screws, then proceed to extract the bulb cover.

Disconnect the power connector and then remove the blown bulb. Replace it with one of the same type (a standard H1 bulb, available at major auto parts stores).

Finally, test if it works correctly and then reassemble all the removed components.


Updated on 25 June 2026 by ScegliAuto


Related tutorials

How to Replace the Fog Light on a Toyota Yaris?
How to Replace the Fog Light on a Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) To replace the fog light on a Toyota Yaris, use a tool like a screwdriver to pry off the cover surrounding the corresponding fog light. This will all…
How to Replace the Fog Lights on a Toyota Yaris
How to Replace the Fog Lights on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) To remove the fog lights on a Toyota Yaris, use a flathead screwdriver to lever and lift the grille around the light, disengaging its retaining clips…
How to Change the Rear Light Bulbs on a Toyota Yaris
How to Change the Rear Light Bulbs on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Are the rear light bulbs on your Toyota Yaris not working? Learn in this video how to replace the bulbs. Open the boot lid, remove the plastic panel …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos