Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs on a Toyota Camry

Model: Toyota Camry Xv50 - Years 2011-2019
Part: Headlight

To replace the headlight bulbs on a Toyota Camry, start by opening the hood. Go to the back of the headlight with the bulbs to be replaced. To replace the low beam, take the socket with the bulb, twist it slightly, and pull it out. Disconnect the bulb from the socket and unplug the socket connector. Take the new bulb with the socket, connect it to the connector, insert it into the headlight, and twist it to secure it. To replace the high beam, perform the same operation as for the low beam, and do the same for the turn signal.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Toyota Camry
How to replace the headlight bulb of the Toyota Camry
Toyota Camry (2002-2006 / Xv30) Replacing the light bulb is a simple and quick operation to do independently. To replace the headlight bulb of a 2005 Toyota Camry, we need to open t…
How to replace the headlight bulb of the 2009 Toyota Camry
How to replace the headlight bulb of the 2009 Toyota Camry
Toyota Camry (2006-2013 / Xv40) To replace the headlight bulb of your 2009 Toyota Camry on your own, simply follow the simple procedure described in the following guide. First, make…
How to Replace the Tail Light Bulb on a Toyota Camry
How to Replace the Tail Light Bulb on a Toyota Camry
Toyota Camry (2011-2019 / Xv50) To replace the tail light bulb on a Toyota Camry, open the trunk lid to access the inner fastener near the bulb that needs to be replaced. By removin…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos