Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery for the Toyota Venza

Model: Toyota Venza MK  1, Av10 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Key

See other generations:
Video tutorial

If the smart key for your first-generation Toyota Venza (model years 2008-2017) suddenly stops working, don't worry; you just need to replace the button battery inside to fix the issue. Below, you'll find the steps to perform this operation.

First, completely remove the physical emergency key and use it to open the cover. Once done, locate the button battery inside and remove it. Then, replace it with a new, compatible battery, and finally, reassemble the cover correctly.


Updated on 2 July 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on the Toyota Venza
How to Replace the Key Battery on the Toyota Venza
Toyota Venza (2008-2017 / MK  1, Av10) If you own a first-generation Toyota Venza and do not know how to replace the battery in the key, this guide is for you. Simply read the steps descri…
How to Replace the Remote Battery on a Toyota Venza
How to Replace the Remote Battery on a Toyota Venza
Toyota Venza (2020-2026 / MK  2, Xu80) To replace the remote battery on a Toyota Venza, pull the key out of its housing by using the lever located at the top of the device: this way, the k…
How to Replace the Key Battery in a 2021 Toyota Venza
How to Replace the Key Battery in a 2021 Toyota Venza
Toyota Venza (2020-2026 / MK  2, Xu80) Replacing the battery in your 2021 Toyota Venza smart key is a very simple maintenance task that takes just a few seconds to complete correctly. Here…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos