Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service on the Toyota Sienna

Model: Toyota Sienna Xl30 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, see how to reset the oil service on the Toyota Sienna, a very simple and quick operation to perform only after completing all scheduled maintenance tasks. Start by entering the cabin and turning on the ignition.

Then, using the button located to the left of the speedometer, scroll through the various display screens until you reach the "Trip A" mileage count. Once done, switch off the ignition, hold down the same button, and turn it on again.

Finally, release the button once the service is fully reset.


Updated on 6 July 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on a Toyota Sienna
How to Reset the Oil Light on a Toyota Sienna
Toyota Sienna (2010-2020 / Xl30) To manually reset the oil light on your Toyota Sienna (2010-2020), carefully read the following guide and implement the steps described. First, enter…
How do you reset the Service light on the Toyota Sienna?
How do you reset the Service light on the Toyota Sienna?
Toyota Sienna (2021-2026 / Xl40) It is possible to completely delete the Service light on the Toyota Sienna by inserting the ignition key into the ignition switch in order to turn on…
How to Reset the Service Light on the Toyota Sienna?
How to Reset the Service Light on the Toyota Sienna?
Toyota Sienna (2004-2010 / Xl20) Resetting the service light on the Toyota Sienna, as shown in this tutorial, is a very simple and quick operation. Before proceeding, ensure you have…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos