Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a Toyota Sienna

Model: Toyota Sienna Xl30 - Years 2010-2020
Part: Service warning light

To manually reset the oil light on your Toyota Sienna (2010-2020), carefully read the following guide and implement the steps described. First, enter the vehicle and turn on the ignition. Immediately press the button on the left side of the instrument panel multiple times until "Trip A" appears on the mini display. Now, turn off and then turn on the ignition while simultaneously holding the same button used earlier. Wait for the oil light reset to complete, and finally, release the button.

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the 2017 Toyota Sienna
How to reset the oil light on the 2017 Toyota Sienna
Toyota Sienna (2010-2020 / Xl30) To manually reset the oil light on your 2017 Toyota Sienna, simply follow the steps described below. First, get into the car and turn on the instrume…
How to reset the oil light on a 2012 Toyota Sienna
How to reset the oil light on a 2012 Toyota Sienna
Toyota Sienna (2010-2020 / Xl30) To correctly complete the manual reset of the engine oil light on your 2012 Toyota Sienna, you must follow the steps described in the following mini …
How to Reset the Oil Service on the Toyota Sienna
How to Reset the Oil Service on the Toyota Sienna
Toyota Sienna (2010-2020 / Xl30) In this tutorial, see how to reset the oil service on the Toyota Sienna, a very simple and quick operation to perform only after completing all sched…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos