Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Glanza
    4. : How to install Toyota Glanza rear diffuser

Toyota Glanza - Video tutorial

Model: Toyota Glanza MK 1 - Years 2019-2024
Operation: How to install Toyota Glanza rear diffuser

Let's see, in this short and simple guide, how to install the rear sport diffuser on the Toyota Glanza bumper, following the instructions below. First let's move to the rear of our car and start installing our new sporty rear diffuser; to do this, let's make it fit perfectly on the bumper, fixing it with the appropriate bolts and tightening it well, as shown in the video. Finally let's install the caps on the diffuser, in order to hide the fixing screws, following the video tutorial until the end!


Posted on 2 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos