Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Glanza
  6. : Where is the spare wheel of the Toyota Glanza?

Toyota Glanza - Video tutorial

Model: Toyota Glanza MK 1 - Years 2019-2024
Part: Wheel
Operation: Where is the spare wheel of the Toyota Glanza?

The spare wheel of the Toyota Glanza is located inside the boot: in order to access it, it is therefore necessary to open the tailgate and lift the carpet located at the base of the luggage compartment. Under the carpet it will therefore be possible to find the spare wheel, which must be removed from its housing by unscrewing its central fixing pin. Then the wheel can be removed and used to replace one of the wheels already present on the car. Once the replacement has taken place, it will be possible to insert the wheel just removed in the boot, fixing it and covering it appropriately.


Posted on 28 May 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos