Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Factory Radio from the Toyota Glanza

Model: Toyota Glanza MK 1 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Car stereo

Video tutorial

Let's briefly review the main steps to remove and replace the factory radio in the Toyota Glanza. First, get inside the vehicle and start by removing the plastic cover located above the radio, prying it off from the sides.

Next, remove the panel found in the center of the dashboard, as shown in the video. At this point, unscrew the mounting screws located on the sides of the radio to remove it, disconnecting the electrical wiring at the back.

Then, install the new radio by following the reverse procedure!


Updated on 14 July 2026 by ScegliAuto


Related tutorials

How to Locate Your Toyota Glanza
How to Locate Your Toyota Glanza
Toyota Glanza (2019-2026 / MK 1) If you park your Toyota Glanza in a crowded shopping mall parking lot, and maybe your vehicle is a common color and you don't remember the section or…
How to Install the Rear Diffuser on the Toyota Glanza
How to Install the Rear Diffuser on the Toyota Glanza
Toyota Glanza (2019-2026 / MK 1) In this brief and simple guide, see how to install the sporty rear diffuser on the bumper of the Toyota Glanza by following the instructions below. F…
How to Connect Your Smartphone via App to the Toyota Glanza
How to Connect Your Smartphone via App to the Toyota Glanza
Toyota Glanza (2019-2026 / MK 1) In today's tutorial video, you will learn how to connect your smartphone for parameter monitoring using the app provided by the manufacturer for the …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos