Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Side Window Seal on a Toyota Corolla

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the side window seal on a Toyota Corolla, lever the seal from its outer side using a tool. This will allow you to lift the seal and spray a small jet of water underneath it. This will help dissolve the adhesive, making it easier to remove the piece.

Once the old seal is completely removed, clean the area underneath to remove any remaining adhesive; this will allow you to position the new replacement part.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Window Regulator Mechanism in a Toyota Corolla?
How to Replace the Front Window Regulator Mechanism in a Toyota Corolla?
Toyota Corolla (2000-2007 / MK 2) In this tutorial, you will learn how to replace the front window regulator mechanism in a Toyota Corolla, a straightforward task that requires good m…
How to Replace the Wiper Motor on a Toyota Corolla
How to Replace the Wiper Motor on a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) To replace the wiper motor on a Toyota Corolla, loosen the central nuts that secure the wipers to their housing. Once the nuts are loosened, complete…
How to Replace the Instrument Cluster of the Toyota Corolla
How to Replace the Instrument Cluster of the Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) In today's tutorial, you will learn how to dismantle and replace the instrument cluster of the Toyota Corolla, following the instructions below. Firs…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos